LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (42 Rear Wheel Suspension Drive Shaft 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 425219 Removing And Installing Wheel Bearing Housing >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear brake disc.

    > 465319 REMOVING AND INSTALLING REAR BRAKE DISC

    > 465419 REMOVING AND INSTALLING REAR PCCB BRAKE DISC

  2. Tighten axle nut -1-  . Operate the brake while doing this (2nd mechanic required) > Tightening torque 460 Nm (340 ftlb.) 
    G15857903Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Axle nut (front axle shown)

  3. Fit hub cap.
  4. Perform suspension alignment.

    > 449503 PERFORMING FRONT AND REAR SUSPENSION ALIGNMENT

scientia non olet · About LEMON Manuals