LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (42 Rear Wheel Suspension Drive Shaft 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 420555 Replacing Rear Axle Housing >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear axle housing.

    > 420519 REMOVING AND INSTALLING REAR AXLE HOUSING 

  2. Install final drive.

    > 390119 REMOVING AND INSTALLING FINAL DRIVE

  3. Tighten axle nut -1-  on both sides of the vehicle. Operate the brake while doing this (2nd mechanic required) > Tightening torque 460 Nm (340 ftlb.) 
    G15857796Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Axle nut (front axle shown)

  4. Perform suspension alignment.

    > 449503 PERFORMING FRONT AND REAR SUSPENSION ALIGNMENT