Technical Values
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| *Location | *Description | *Type | *Basic value | *Tolerance 1 | *Tolerance 2 |
|---|---|---|---|---|---|
| Rear axle housing to body | Item 1: Hexagon head bolt M14x1.5 x145/Always replace bolts following removal! | Initial tightening | 130 Nm (95.9 ftlb.) | ||
|
Mounting for rear axle housing |
|||||
| Rear axle housing to body | Item 1: Hexagon-head bolt M14x1.5 x145/Always replace bolts after removal! | Final tightening torque angle | + 180° | ||
|
Mounting for rear axle housing |
|||||
| Drive shaft protective plate to rear axle housing (right with TPM control unit holder) | Item 2: Hexagon roundhead bolt M6x12 | Tightening torque | 8 Nm (5.9 ftlb.) | ||
|
Mounting for protective plate for drive shaft |
|||||
| Bearing protective plate to rear axle housing | Item 2: Hexagon-head bolt M5 | Tightening torque | 7 Nm (5.2 ftlb.) | ||
|
Protective plate mount |
|||||
| Balancer to rear axle housing | Hexagon-head bolt, M10x30 | Tightening torque | 55 Nm (40.6 ftlb.) | ||
| Rear axle strut to rear axle housing mount | Item 2: Hexagon-head bolt M8x25 | Tightening torque | 20 Nm (14.8 ftlb.) | ||
|
Mounting for rear-axle strut |
|||||
| Rear axle strut to body strut | Item 3: Hexagon-head bolt M8 x 25 | Tightening torque | 20 Nm (14.8 ftlb.) | ||
|
Mounting for rear-axle strut |
|||||
| Heat insulation in boot pan | Item 2: Internal hexagon roundhead bolt | Tightening torque | 2.5 Nm (1.8 ftlb.) | ||
|
Mounting for heat insulation in luggage compartment pan |
|||||
| Shock absorber/spring damper to body | Item 2: Hexagon-head bolt M10 x 42 | Tightening torque | 50 Nm (36.9 ftlb.) | ||
|
Rear shock absorber/spring damper |
|||||
| Air line to rear air spring | Item 3: Union nut | Tightening torque | 2 Nm (1.5 ftlb.) | ||
|
Plug connections on air spring bellows |
|||||
| Drive shaft to wheel hub | Item 1: Hexagon nut, M22 x 1.5/always replace nut following removal! | Tightening torque | 460 Nm (340 ftlb.) | ||
|
Axle nut |
|||||