Exhaust System

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exhaust System Components Location With Torque Specification (V8 Turbo)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Exhaust system (figure shows V8 Turbo)

1	Exhaust system
2	Rear silencer
3	Tailpipe
4	Strut
5	Front silencer
6	Actuator for exhaust flap on rear silencer
7	Screws, M5 > Tightening torque 5 Nm (3.5 ftlb.)
8	Ball clamp/replace > Tightening torque 35 Nm (26 ftlb.)
9	Screws, M8 > Tightening torque 23 Nm (17 ftlb.)
10	Screws, M8 x 25 > Tightening torque 23 Nm (17 ftlb.)
11	Screws, M8 x 22 > Tightening torque 23 Nm (17 ftlb.)
12	Screws, M6 x 12 > Tightening torque 8 Nm (6 ftlb.) +/- 1 Nm (0.5 ftlb.)
not pictured	Exhaust clamp > Tightening torque 33 Nm (24 ftlb.) Used when replacing rear silencer.