Installing Battery Sensor
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
Tightening torque for nut securing ground strap to body: > Tightening torque 15 Nm (11 ftlb.)
Tightening torque for battery ground line: > Tightening torque 3.5 Nm (2.5 ftlb.)
Tightening torque for screws on cover: > Tightening torque 1.5 Nm (1.1 ftlb.)