Technical Values
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance | Tolerance |
|---|---|---|---|---|---|
| Screw securing oil intake tube to oil pump | M6 x 26 | Initial tightening | 8 Nm (6 ftlb.) | ||
| Screw securing oil intake tube to oil pump | M6 x 26 | Final tightening | + 90° | ||
| Screw securing shaft cover to oil guide housing | M6 x 16 (2 ea.) | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screw securing oil guide housing to crankcase | M6 x 22 (19ea.)/replace, observe tightening sequence | Initial tightening | 3 Nm (2 ftlb.) | ||
| Screw securing oil guide housing to crankcase | M6 x 22 (19ea.)/replace, observe tightening sequence | Final tightening | + 90° | ||
| Screw securing chain housing cover to oil guide housing | M6 x 25 (6ea.)/replace, observe tightening sequence | Initial tightening | 3 Nm (2 ftlb.) | ||
| Screw securing chain housing cover to oil guide housing | M6 x 25 (6ea.)/replace, observe tightening sequence | Final tightening | + 90° | ||
| Screw for deflection roller (air-conditioning compressor) | M8 x 37/replace | Tightening torque | 25 Nm (19 ftlb.) |