LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (17 - Engine - Lubrication 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 170419 Removing And Installing Oil-Pressure Sender (V6 Turbo) >> Installing Oil-Pressure Sender

Installing Oil-Pressure Sender

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1 Replace seal.
    2. 1.2 Screw in new oil-pressure sender using > 9594 - socket-wrench insert  and tighten to > Initial tightening 3 Nm (2 ftlb.)  > Final tightening + 45°  .
scientia non olet · About LEMON Manuals