Checking Engine Oil Pressure
WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Hot fluid
- Danger of scalding
→ Let the fluid cool down.
→ Wear personal protective gear.
WARNING:
Highly inflammable or explosive materials
- Danger of fire or explosion
→ Avoid contact with hot parts or sources of ignition.
→ Use suction to remove ignitable vapours.
→ Attach warning sign in a clearly visible position.
→ Contain leaked media using non-flammable absorbent material and put it in a container designed for this purpose for disposal in accordance with local requirements.
→ Secure collection containers/vessels to prevent them from tipping over.
Information
- Engine oil pressure may be too low for a number of reasons:
- Oil is diluted.
- Oil pump is faulty.
- Too much bearing clearance.
- Oil level is too low.
- Oil pressure-regulating valve is faulty.
- Incorrect oil has been used. Only use oil that has been approved by Porsche for the measurement.
Information
Test conditions for checking engine oil pressure
- Correct engine-oil level
- Engine oil temperature approx. 80°C
- > V.A.G 1342 - Oil Pressure Tester must be screwed onto the bore on the oil-pressure sender. Secure test hose out of the way.
- Screw oil-pressure sender into > V.A.G 1342 - Oil Pressure Tester and insert plug connection.
- Start the engine.
- Check engine oil pressure.
- Engine oil pressure at idle speed: > Overpressure 0.9 bar
- Engine oil pressure at 2, 000 rpm: > Overpressure 1.3 bar
- Disconnect plug connection on the oil-pressure sender and unscrew oil-pressure sender from the > V.A.G 1342 - Oil Pressure Tester .
- Loosen adapter and remove > V.A.G 1342 - Oil Pressure Tester .