LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (72 Seat Frames - Coupe -- 971 - PANAMERA (971)) >> WM, 725655 Replacing Rear Backrest Frame >> Disassembling Rear Backrest Frame

Disassembling Rear Backrest Frame

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew screw -1-  and remove holder -2-  .
    G15873870Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing holder

  2. Remove threaded plate -3-  .
    G15873871Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing threaded plate

  3. Unclip cover -4-  (-arrows-  ) and remove it.
    G15873872Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Unclipping cover

  4. Unscrew screws -5-  and remove clip -6-  .
    G15873873Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing clip

    Only for vehicles with load-through provision on rear left backrest frame: 

  5. Unscrew bolt for load-through provision lock.

    Only for vehicles with armrest on rear left backrest frame (without load-through provision): 

  6. Unscrew screws -7-  and remove armrest holder -8-  .
    G15873874Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing armrest holder

scientia non olet · About LEMON Manuals