Assembling Rear Backrest Frame
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Assembly is performed in reverse order. Pay particular attention to the following:
Tightening torque for screw on side holder: > Tightening torque 6 Nm (4 ftlb.)
Tightening torque for screws on clip: > Tightening torque 9 Nm (6.5 ftlb.)
Tightening torque for bolt on lock for load-through provision: > Tightening torque 50 Nm (37 ftlb.) +/- 5 Nm (3.5 ftlb.)
Tightening torque for screws on armrest holder: > Tightening torque 9 Nm (6.5 ftlb.)