Intermediate Shaft

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Intermediate Shaft Components Location With Torque Specification - V8 Turbo

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Intermediate shaft - V8 Turbo

1	Intermediate shaft/oiling bearing locations
2	Coolant pump drive gear wheel
3	Screw, M10 x 20/replace > Initial tightening 15 Nm (11.1 ftlb.) > Final tightening + 45°
4	Thrust bearing
5	Gasket/replace
6	Cap
7	Screws, M6 x 16 > Tightening torque 9 Nm (6.6 ftlb.)
8	Screw M10 x 32/replace > Initial tightening 15 Nm (11.1 ftlb.) > Final tightening + 45°
9	Assembly pin, must be removed following assembly.
10	Bracing gear wheel