Tightening Sequence For Crankcase
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Tightening sequence for crankcase - V8 biturbo
| 1-30 | Tightening sequence for crankcase/bearing saddles |
Tightening specifications for crankcase/bearing saddle
| Screw | Steps | Tightening torque |
|---|---|---|
| 1-20 | Step 1:/Fit | > Tightening torque 15 Nm (11 ftlb.) |
| 1-20 | Step 2: | > Tightening torque 30 Nm (22 ftlb.) |
| 1-20 | Step 3: | > Torque angle + 200° |
| 1-20 | Step 4:/Loosen by 2 | turns > Torque angle 720° |
| 1-20 | Step 5: | > Tightening torque 30 Nm (22 ftlb.) |
| 1-20 | Step 6: | > Torque angle 70° |
| 21-30 | Step 7: | > Initial tightening 10 Nm (7.5 ftlb.) > Final tightening + 50° |