Tightening Sequence For Low-Pressure Fuel Lines
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Fit union nut -1-
by hand.
- 1.1 Coat thread on union nuts with Microgleit DF 977S. Observe drying time of at least 5 minutes before fitting.
- Tighten screws -2-
.
> Tightening torque 9 Nm (6.5 ftlb.)
- Union nut -1-
> Initial tightening 8 Nm (6 ftlb.)
> Final tightening + 50°
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Tightening sequence for low-pressure fuel line