LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (20 Fuel Supply, Actuator 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 203819 Removing And Installing Supply Line >> Preliminary Work >> Preliminary Work - V8 Biturbo (Section From Engine To High-Pressure Pump)

Preliminary Work - V8 Biturbo (Section From Engine To High-Pressure Pump)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Relieve fuel pressure in the system.
    1. 1.1 Remove cover from fuse carrier F in the engine compartment at the front right.
    2. 1.2 Pull out the fuse -1-  for the fuel pump.
    3. 1.3 Start the engine, wait until it cuts out and then re-insert the fuse -1-  .
    G15880725Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Fuel pump fuse

  2. Remove cross panel.

    > WM, 508119 REMOVING AND INSTALLING CROSS PANEL

  3. Remove exhaust system.

    > 260119 REMOVING AND INSTALLING EXHAUST SYSTEM