Installing Tank Vent
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order.
Fastening nuts for cable duct for engine wire harness (cylinders 5-8) > Tightening torque 9 Nm (6.5 ftlb.) (6.6 ftlb.) .
Fastening screw for tank ventilation sensor (USA) or dummy (cylinders 5-8) > Tightening torque 9 Nm (6.5 ftlb.) .
Fastening screws for engine wire harness holder > Item 4: Internal hexagon round-head bolt 8 Nm (5.8 ftlb.) .
Fastening screw for tank ventilation sensor (USA) or dummy (cylinders 1-4) > Tightening torque 9 Nm (6.5 ftlb.) .
Fastening nuts for cable duct for engine wire harness (cylinders 1-4) > Tightening torque 9 Nm (6.5 ftlb.) (6.6 ftlb.) .