LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (15 Engine - Cylinder Head, Valve Drive 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 155519 Removing And Installing Solenoid Hydraulic Valve For Valve Lift Adjustment (V8 BITURBO) >> Removing Solenoid Hydraulic Valve For Valve Lift Adjustment (Right Cylinder Bank) >> Removing Solenoid Hydraulic Valve For Valve Lift Adjustment (Cylinder 3)

Removing Solenoid Hydraulic Valve For Valve Lift Adjustment (Cylinder 3)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Only for intake side of cylinder 3: 

  1. Remove partial load vent line for oil mist separator -2-  .
    1. 1.1 Press release buttons on both sides and loosen adapter -1-  .
    2. 1.2 Remove partial load vent line -2-  .
    G15824555Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Partial load vent line for oil mist separator

  2. Lift up moulded part -2-  .
    1. 2.1 Release and disconnect electric push-on connector -1-  .
    2. 2.2 Lift up moulded part -2-  for easier access to the solenoid hydraulic valve for valve lift adjustment.
    G15824556Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Intake side of cylinder 3

  3. Unscrew fastening screws -1-  and remove solenoid hydraulic valve for valve lift adjustment -2-  .
    G15824557Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Solenoid hydraulic valve for valve lift adjustment

    Only for outlet side of cylinder 3: 

  4. Remove partial load vent line for oil mist separator -2-  .
    1. 4.1 Press release buttons on both sides and loosen adapter -1-  .
    2. 4.2 Remove partial load vent line -1-  .
    G15824558Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Partial load vent line for oil mist separator

  5. Remove engine wire harness guide -2-  .
    1. 5.1 Unclip, release and disconnect electric plug connection -1-  .
    2. 5.2 Open engine wire harness guide -2-  and remove wire harness.
    3. 5.3 Screw off fastening nuts -3-  .
    4. 5.4 Remove engine wire harness guide -2-  .
    G15824559Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Engine wire harness guide

  6. Lift up moulded part -4-  .
    1. 6.1 Pull tank vent valve -1-  off holder -2-  .
    2. 6.2 Release and disconnect electric plug connection -3-  .
    3. 6.3 Lift up moulded part -4-  for easier access to the solenoid hydraulic valve for valve lift adjustment.
    G15824560Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Tank vent

  7. Unscrew fastening screws -1-  and remove solenoid hydraulic valve for valve lift adjustment -2-  .
G15824561Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Solenoid hydraulic valve for valve lift adjustment

scientia non olet · About LEMON Manuals