LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (15 Engine - Cylinder Head, Valve Drive 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 155519 Removing And Installing Solenoid Hydraulic Valve For Valve Lift Adjustment (V8 BITURBO) >> Removing Solenoid Hydraulic Valve For Valve Lift Adjustment (Right Cylinder Bank) >> Removing Solenoid Hydraulic Valve For Valve Lift Adjustment (Cylinder 2)

Removing Solenoid Hydraulic Valve For Valve Lift Adjustment (Cylinder 2)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Only for intake side of cylinder 2: 

  1. Remove partial load vent line for oil mist separator -2-  .
    1. 1.1 Press release buttons on both sides and loosen adapter -1-  .
    2. 1.2 Remove partial load vent line -2-  .
    G15824548Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Partial load vent line for oil mist separator

  2. Lift up moulded part -2-  .
    1. 2.1 Release and disconnect electric plug connection -1-  .
    2. 2.2 Lift up moulded part -2-  for easier access to the solenoid hydraulic valve for valve lift adjustment.
    G15824549Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Intake side of cylinder 2

  3. Unscrew fastening screws -1-  and remove solenoid hydraulic valve for valve lift adjustment -2-  .
    G15824550Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Solenoid hydraulic valve for valve lift adjustment

    Only for outlet side of cylinder 2: 

  4. Remove partial load vent line for oil mist separator -2-  .
    1. 4.1 Press release buttons on both sides and loosen adapter -1-  .
    2. 4.2 Remove partial load vent line -2-  .
    G15824551Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Partial load vent line

  5. Remove engine wire harness guide -2-  .
    1. 5.1 Unclip, release and disconnect electric plug connection -1-  .
    2. 5.2 Open engine wire harness guide -2-  and remove wire harness.
    3. 5.3 Screw off fastening nuts -3-  .
    4. 5.4 Remove engine wire harness guide -2-  .
    G15824552Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Engine wire harness guide

  6. Lift up moulded part -2-  .
    1. 6.1 Release and disconnect electric plug connection -1-  .
    2. 6.2 Lift up moulded part -2-  for easier access to the solenoid hydraulic valve for valve lift adjustment.
    G15824553Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Outlet side of cylinder 2

  7. Unscrew fastening screws -1-  and remove solenoid hydraulic valve for valve lift adjustment -2-  .
G15824554Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Solenoid hydraulic valve for valve lift adjustment

scientia non olet · About LEMON Manuals