LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (13 Engine - Crank Drive, Pistons 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 137819 Removing And Installing Drive Belt (V8 BITURBO) >> Installing Drive Belt >> Installing Drive Belt For Generator

Installing Drive Belt For Generator

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install drive belt for generator -3-  .
    1. 1.1 Fit drive belt for generator -3-  on the pulleys and align it along the grooves on the pulleys. First release tensioning roller.
    2. 1.2 With the belt tensioner slackened -2-  , fit lever with Torx wrench T55 -1-  on the belt tensioner -2-  and pre-tension it in an anticlockwise direction.
    3. 1.3 Fit drive belt for generator -3-  on the tensioning roller.
    4. 1.4 Carefully allow the belt tensioner -2-  to turn back to its original position, thereby tensioning drive belt for generator -3-  .
    G15824517Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Belt tensioner for generator

  2. Check that drive belt for generator -3-  is seated and tensioned correctly.
scientia non olet · About LEMON Manuals