Removing Crankshaft Vibration Damper

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fit brace T40330/1 -1- .
1. 1.1 Turn the crankshaft so that brace T40330/1 -1- can be fitted.
2. 1.2 Fit brace T40330/1 -1- on the crankshaft vibration damper -2- .
3. 1.3 Fit spacer sleeve T40330/3 -3- underneath and screw in and tighten screw -4- > Tightening torque 23 Nm (17 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Brace
Unscrew and remove screw -5- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screw on crankshaft vibration damper
Remove brace T40330/1 -1- .
1. 3.1 Unscrew and remove screw -4- .
2. 3.2 Remove spacer sleeve T40330/3 -3- and brace T40330/1 -1- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Brace
Remove crankshaft vibration damper -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Crankshaft vibration damper