Installing Crankshaft Sealing Ring

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Fit guide sleeve T40320B/4 -1- from > T40320B - assembly fixture on the crankshaft and slide sealing ring -2- into the cover.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Guide sleeve and sealing ring

Information

Leave guide sleeve fitted on the crankshaft.
Press in sealing ring -1- .

G15824501

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pressure piece

2.1 Fit pressure piece T40320B/1 -3- from > T40320B - assembly tool on the crankshaft -2- with vibration damper screw.
2.2 Press in sealing ring -1- up to the anchor block.
2.3 Remove thrust piece T40320B/1 -3- and guide sleeve T40320B/4 .