LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (13 Engine - Crank Drive, Pistons 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 135955 Replacing Crankshaft-Flywheel Sealing Ring >> Removing Sealing Ring

Removing Sealing Ring

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Dirt and contamination 
  • Risk of damage to units or components 

→ Protect components from dirt and contamination.
→ Clean or replace dirty components.
  1. Remove sealing ring using > T20143 - puller hook  (T20143/2).

    Use puller hook carefully to prevent damage to the sealing faces! 

    1. 1.1 Fit puller hook at two opposite positions and carefully lever off the sealing ring.
    G15824480Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing sealing ring on flywheel side

  2. Clean the crankshaft flange.