Removing Crankshaft

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Loosen bearing covers on crankshaft.
1. 1.1 Mark position of bearing covers -1- .
2. 1.2 Unscrew and remove screws -2 and 3- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Crankshaft bearing covers

Remove bearing cover -2- using > T40332 - puller-1- and > VW771 - multi-purpose tool .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Using special tool for bearing covers

1	> T40332 - Puller
2	Crankshaft bearing covers
3	Grub screws - for securing the puller on the bearing cover
4	Threaded bores - for holding the grub screws

Remove crankshaft.
1. 3.1 Remove crankshaft with the help of another person and set it down on a clean surface.
2. 3.2 Remove bearing shells and place them with the relevant bearing covers.