Installing Pressure Sensor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

O-rings must always be replaced.
O-rings must be coated lightly with Kluber Syntheso Glep.

Install pressure sensor -1- .
1. 1.1 Replace O-ring.
2. 1.2 Insert pressure sensor -1- .
3. 1.3 Fit and tighten screw -3- .
  > Tightening torque 5 Nm (3.5 ftlb.)
4. 1.4 Connect and lock electric plug connection -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Right pressure sensor