Installing Pressure Pipe
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Information
- O-rings must always be replaced.
- O-rings must be coated lightly with Kluber Syntheso Glep.
- Install pressure pipe -1-
.
- 1.1 Replace O-ring on the pressure pipe -1- .
- 1.2 Tighten screw-type clamp -2- on the pressure pipe -1- at the pressure hose -3- to > Tightening torque 5.5 Nm (4 ftlb.) +/- 0.5 Nm (0.3 ftlb.) .
- 1.3 Tighten screw-type clamp -4- on the connecting hose -5- at the pressure pipe -1- to > Tightening torque 3.5 Nm (2.5 ftlb.) .
- 1.4 Tighten screws -6- to > Tightening torque 9 Nm (6.5 ftlb.) .
Right pressure pipe - V8 biturbo