Installing Oil Cooler
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Information
Risk of contaminating the lubricating system
- Cover open parts of the cylinder head.
- Installation is performed in reverse order. Pay particular attention to the following:
- 1.1 Fit new seal.
- 1.2 Screw in screws in the sequence -1 to 8- and tighten in steps in the indicated sequence > Initial tightening 5 Nm (3.5 ftlb.) > Final tightening + 9 Nm (6.5 ftlb.)
Tightening sequence