Removing Oil Pump

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

Be careful of the bushes when removing the oil pump. These can sometimes remain in the metal bead gasket or fall into the engine.
The oil pump must never be re-installed without the bushes.

Information

Use > VAS 6928 - Socket wrench set, 39-piece to loosen the screw on the sprocket.

Remove oil intake tube -1- .
1. 1.1 Unscrew screws -2- .
2. 1.2 Remove oil intake tube -1- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Oil intake tube
Remove sprocket guard -1- .
1. 2.1 Unscrew screws -2- .
2. 2.2 Remove sprocket guard -1- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Sprocket guard
Remove sprocket -1- .
1. 3.1 Use > T10172 - counter-hold tool-2- to counter at the sprocket -1- .
2. 3.2 Unscrew screw -3- using > VAS 6928 - Socket wrench set, 39-piece .
3. 3.3 Remove sprocket -1- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Counter-hold tool on sprocket
Remove oil pump -1- .
1. 4.1 Unscrew screws -2- .
2. 4.2 Remove oil pump -1- with seal.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Oil pump