LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (40 Wheel Suspension Front Drive Shaft 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 407719 Removing And Installing Front Anti-Roll Bar (PDCC) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic values Tolerance 1 Tolerance 2
Anti-roll bar to connecting link (PDCC) Item 3: Hexagon-head bolt, M12 x 1.5 x 60 and hexagon nut/always replace bolts and nuts following removal! Initial tightening 70 Nm (52 ftlb.)    
G15861728Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for connecting link for anti-roll bar
Anti-roll bar to connecting link (PDCC) Item 3: Hexagon-head bolt, M12 x 1.5 x 60 and hexagon nut/always replace bolts and nuts following removal! Final tightening + 90°    
G15861729Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for connecting link for anti-roll bar
Anti-roll bar clamps to anti-roll bar mount Item 2: Hexagon-head bolt, M10 x 32/always replace bolts following removal! Initial tightening 50 Nm (37 ftlb.)    
G15861730Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Anti-roll bar mount
Anti-roll bar clamps to anti-roll bar mount Item 2: Hexagon-head bolt, M10 x 32/always replace bolts following removal! Final tightening + 30°    
G15861731Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Anti-roll bar mount
Ground line to front PDCC (EAWS) control unit Item 1: Internal hexagon roundhead bolt, M5 Tightening torque 5.6 Nm (4 ftlb.)    
G15861732Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disconnecting ground lines