LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (19 - Engine - Cooling 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 195519 Removing And Installing Coolant Regulator Housing (V8 BITURBO) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Vacuum line holder M6 screw Tightening torque 9 Nm (6.6 ftlb.)    
Screw on front cable duct on engine Item 4 Tightening torque 9 Nm (6.5 ftlb.)    
G15824800Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screw on front cable duct on engine
Coolant regulator housing Screws, M6 x 40 (3 ea.) Tightening torque 9 Nm (6.5 ftlb.)    
Mounting for coolant regulator housing and coolant pump Screws, M6 x 25 (13 ea.) Tightening torque 9 Nm (6.5 ftlb.)    
Screw for O-ring guide for oil dipstick Replace O-ring. Tightening torque 9 Nm (6.6 ftlb.)