Installing Coolant Pump
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Information
If the coolant pump is replaced, the oil-pressure sender must be removed and installed on the new coolant pump.
> 170419 REMOVING AND INSTALLING OIL-PRESSURE SENDER (V8 BITURBO)
- Replace the seal and O-rings.
- Install in reverse order.
Observe tightening sequence for screws -1 - 7- .
Fit screws securing coolant pump and tighten to > Tightening torque 9 Nm (6.5 ftlb.) .
Tightening sequence for coolant pump screws