LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (19 - Engine - Cooling 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 194319 Removing And Installing Bleed Tube >> Remove Breather Pipe >> Removing Breather Pipe

Removing Breather Pipe

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Hot components 
  • Risk of burns 

    → Let hot components cool down.

    → Wear personal protective gear.

WARNING: Hot fluid 
  • Danger of scalding 

    → Avoid contact with hot fluid.

    → Wear personal protective gear.

  1. Disconnect coolant vent line -1-  .
    1. 1.1 Loosen clamp -2-  and pull off vent line -1-  .
    G15824782Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Coolant vent line

  2. Unscrew screw -1-  and press vacuum line holder -2-  aside.
    G15824783Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Vacuum line holder

  3. Loosen and remove vent line -1-  on both cylinder heads.
G15824784Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Vent line for cylinder head