LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (47 Brakes - Brake Hydraulic System, Regulator, Booster 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 473956 Replacing Brake CALLIPER Screws >> Technical Values

Technical Values

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Location Des... Type Basic val... Toleranc... Toleranc...
Brake calliper screws on pad retaining pin The brake calliper screws may only be replaced in the event of a complaint (corrosion)/always replace screws after dismantling! Initial tightening 10 Nm (7.4 ftlb.)    
G15857008Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Brake calliper screws on pad retaining pin
Brake calliper screws on pad retaining pin The brake calliper screws may only be replaced in the event of a complaint (corrosion)/always replace screws after dismantling! Final tightening + 30° + 4°  
G15857009Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Brake calliper screws on pad retaining pin