LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (47 Brakes - Brake Hydraulic System, Regulator, Booster 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 471519 Removing And Installing Brake Master Cylinder >> Installing Brake Master Cylinder

Installing Brake Master Cylinder

WARNING: This page is about a different car, the 2020 Porsche Panamera, 2019 Porsche Panamera, 2018 Porsche Panamera, and 2017 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in and tighten nuts on the brake master cylinder > Tightening torque 23 Nm (16.75 ftlb.) 

    Install new  sealing ring between the brake booster and brake master cylinder.

scientia non olet · About LEMON Manuals