Replacing Positive Crankcase Ventilation Hose

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Dirt and contamination

Risk of damage to units or components
→ Protect components from dirt and contamination.

→ Clean or replace dirty components.

Information

Clean all line connections carefully and close them off or cover them.
Use suitable stoppers for closing off lines.

Information

Only unscrew the screw if the positive crankcase ventilation hose needs to be replaced.
Always ensure that a new screw with the part number 9A710344800 is used.

Replace positive crankcase ventilation hose -2- .

1.1 Loosen screw -1- using a multiple-tooth socket wrench (M6).
1.2 Drive the multiple-tooth socket wrench into the screw head using a hammer.
1.3 Loosen the screw -1- using jerking movements and unscrew.
1.4 Replace positive crankcase ventilation hose -2- .

1.5 Fit new screw -1- and tighten using > VAS 6970 - Insert bit .

> Tightening torque 9 Nm (6.5 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Positive crankcase ventilation hose