LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Taycan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (10 Engine - Crankcase, Suspension 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 101419 Removing And Installing Front Crankcase Cover (V8 BITURBO) >> Removing Crankcase Cover

Removing Crankcase Cover

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove crankcase cover.
    1. 1.1 Loosen and unscrew screws in the sequence -10 to 1-  .
    2. 1.2 Press off crankcase cover by screwing in screws.
      1. 1.2.1 Screw in screws at the three screw points -arrows-  uniformly by half a turn each.
      2. 1.2.2 The crankcase cover becomes loose.
    3. 1.3 Remove crankcase cover.
      Fig 1: Crankcase Cover Screws Loosening Sequence
      G15824419Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Crankcase cover

scientia non olet · About LEMON Manuals