Removing Wire Harness For Rear Drive Mechanism
NOTE:
Voltage peaks
- Risk of damage to electrical load or to the control unit
→ Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).
→ Switch off electrical loads before disconnecting or removing them.
- Release and disconnect electric plug connections -1-
at the top and loosen clips -2-
.
Electric plug connections, top
- Release and disconnect electric plug connection at the top rear -1-
and loosen clips -2-
.
Electric plug connection, top rear
- Release and disconnect electric plug connections at the bottom left -1-
and loosen clips -2-
.
Electric plug connections, bottom left
- Release and disconnect electric plug connections at the bottom right -1-
and loosen clips -2-
.
Electric plug connections, bottom right
- Loosen clips at the bottom right -1-
.
Clips, bottom right
- Release and disconnect electric plug connections at the bottom left -1-
.
Electric plug connections, bottom left
- Release and disconnect electric plug connections at the bottom center -1-
and loosen clips -2-
.
Electric plug connections, bottom center