Removing Front Loudspeaker (In Dashboard) At The Centre
NOTE:
NOTIFICATION
Voltage peaks
Voltage peaks
- Risk of damage to electrical load or to the control unit
→ Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).
→ Switch off electrical loads before disconnecting or removing them.
- Unscrew screws -1-
on front loudspeaker (in dashboard) at the center -2-
.
Screws
- Remove front loudspeaker (in dashboard) at the center -2- .
- Remove front loudspeaker. (in dashboard) at the center -3- .
- Release and disconnect electric plug connection -1-
from front loudspeaker (in dashboard) at the center -2-
.
Electric plug connection
- Remove front loudspeaker (in dashboard) at the center.