Installing Rear Roof Sun Blind Mechanism

Information 

• Some of the repair illustrations show only one side of the vehicle. 
• Also complete certain steps on the opposite side of the vehicle as well. 

Information 

Do not grease sun blind sliders and operating cables.

Information 

The help of another person is required.

1. Insert rear roof sun blind mechanism -2-  and screw in and tighten screws -1-  > Tightening torque 2 Nm (1.5 ftlb.) 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Rear roof sun blind mechanism

   Information 

   Make sure that the guide piece -1-  is inserted.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Guide piece

2. Install bracket for rear roof sun blind motor -3-  .
   1. 2.1 Insert bracket for rear roof sun blind motor -3-  and position drive cables for the sun blind in the guides.
   2. 2.2 Screw in and tighten screws -2-  > Tightening torque 2 Nm (1.5 ftlb.) 
   3. 2.3 Screw in and tighten screws -1-  > Tightening torque 2.5 Nm (2 ftlb.) 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bracket for rear roof sun blind motor