Replacing Front Roof Assembly Seal

WARNING: This page is about a different variant/trim than selected.

Pull front roof assembly seal -1- off the roof assembly all the way around, starting at the rear -arrows- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing front roof assembly seal
Remove excess adhesive -2- on the front roof assembly at the left and right.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing adhesive
Stick that the hinges on the acoustic covers -3- are fitted securely at the left and right.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Checking hinges on acoustic covers
Position front roof assembly seal -1- on roof assembly, press it into the guides and then press it in further using an assembly wedge.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing front roof assembly seal

Information

The seal must not be deformed after fitting.
Check that front roof assembly seal is fitted correctly.