Technical Values

WARNING: This page is about a different variant/trim than selected.

Location	Des...	Type	Basic val...	Toleranc...
Front roof to sliding-roof panel (D1)		Gap dimension	3 mm	+/- 0.9 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Gap dimension
Front roof to sliding-roof panel (D2)	Offset	Gap dimension	1.2 mm	+/- 0.9 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Gap dimension
Sliding-roof panel to rear lid (D3)		Gap dimension	3 mm	+/- 0.9 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Gap dimension
Sliding-roof panel to rear lid (D4)	Offset	Gap dimension	0.5 mm	+/- 0.9 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Gap dimension
Screw on sliding-roof panel	Item 3	Tightening torque	5.5 Nm (4 ftlb.)	+/- 0.5 Nm (0.3 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Screws on sliding-roof panel