No Identifiable Deformations On The Body Structure
WARNING: This page is about a different variant/trim than selected.
- Check seam joining line on the accessories
> Refer to 5000IN Diagram - Body gap dimensions in the appropriate service information
- Check accessories for paint abrasion (accessories that were hit during impact)
- Drive the vehicle onto a lifting platform and raise it. Measure screw points using an electronic measuring system (e.g > VAS 6526/11 - Measuring Unit, Professional or > VAS 811 019 - Measuring system ) and compare with the required values.
- Determine extent of any apparent damage to vehicle parts
Measure running gear electronically if necessary
- Decide whether the vehicle has to be repaired
Repair vehicle, if necessary.