LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 81 (Collision*** 5X Body - General - Wagon -- 971 - PANAMERA (971)) >> 5X Body - General >> WM, 5X00IN22 Processing Body Foam Filler >> Processing Body Foam Filler >> Preparing Bonding Surfaces >> Cleaning

Preparing Bonding Surfaces: Cleaning

WARNING: This page is about a different variant/trim than selected.

Then, clean the bonding flange areas using a lint-free cloth soaked in isopropanol or acetone until there are no more residues on the cloth.

Leave cleaned surfaces to dry off for 15 minutes; the bonding surfaces must be completely dry.

scientia non olet · About LEMON Manuals