Technical Values - Plenum Panel, A-Strut
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Screw securing upper part of plenum panel at the centre to A-strut | Item 1 | Tightening torque | 8 Nm (6 ftlb.) | +/- 15 % |
|
Screws for A-strut |
||||
| Screw securing upper part of plenum panel at the side to centre plenum panel | Item 2 | Tightening torque | 4 Nm (3 ftlb.) | +/- 15 % |
|
Screws for A-strut |
||||
| Screw securing upper part of plenum panel at the side to spring strut mount | Item 7 | Tightening torque | 8 Nm (6 ftlb.) | +/- 15 % |
|
Screw securing side plenum panel to spring strut mount |
||||
| Nut securing cross panel to firewall | Item 1 | Tightening torque | 3.5 Nm (2.5 ftlb.) | +/- 10 % |
|
Nut securing cross panel to firewall |
||||