LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 71 (72 Seat Frames - Wagon -- 971 - PANAMERA (971)) >> WM, 726819 Removing And Installing Rear-Backrest Lock >> Installing Rear-Backrest Lock

Installing Rear-Backrest Lock

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for screws for rear-backrest lock cover: > Tightening torque 1.5 Nm (1 ftlb.) 

    Tightening torque for screws for rear-backrest lock: > Tightening torque 24 Nm (18 ftlb.) +/- 2.4 Nm (2 ftlb.) 

scientia non olet · About LEMON Manuals