LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 71 (72 Seat Frames - Wagon -- 971 - PANAMERA (971)) >> WM, 726719 Removing And Installing Rear Backrest Mount >> Installing Load-Through Provision Mount >> Notes

Installing Load-Through Provision Mount: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order.

    Screw in and tighten bolt securing load-through provision lock to backrest frame: > Tightening torque 50 Nm (37 ftlb.) +/- 5 Nm (3.5 ftlb.) 

scientia non olet · About LEMON Manuals