Disassembling Rear Backrest Frame

WARNING: This page is about a different variant/trim than selected.

Unscrew screw -1- and remove holder -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing holder
Remove threaded plate -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing threaded plate
Unclip cover -4- (-arrows- ) and remove it.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unclipping cover
Unscrew screws -5- and remove clip -6- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing clip

Only for vehicles with load-through provision on rear left backrest frame:
Unscrew bolt for load-through provision lock.
Only for vehicles with armrest on rear left backrest frame (without load-through provision):
Unscrew screws -7- and remove armrest holder -8- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing armrest holder