LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 71 (72 Seat Frames - Wagon -- 971 - PANAMERA (971)) >> WM, 723419 Removing And Installing Front Lumbar Support >> Installing Front Lumbar Support

Installing Front Lumbar Support

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in and tighten screws securing valve block holder to backrest frame > Tightening torque 3.5 Nm (2.5 ftlb.) +/- 0.5 Nm (0.4 ftlb.)