Subsequent Work
WARNING: This page is about a different variant/trim than selected.
Information
- The necessary preliminary and subsequent work will vary depending on equipment.
- The number of electric plug connections, tie-wraps and electric lines will vary depending on equipment.
- Tighten all electric plug connections, tie-wraps and electric lines on the front seat frame.
- Install air cushion for seat.
- Only for vehicles with 18-way front sports seats (I-no. Q1J) or 14-way front comfort seats (I-no. Q2J):
Install front seat-surface extension.
> 740819 REMOVING AND INSTALLING FRONT SEAT-SURFACE EXTENSION
- Install motor for rear vertical adjustment.
> 729219 REMOVING AND INSTALLING MOTOR FOR REAR VERTICAL ADJUSTMENT
- Install motor for front vertical adjustment.
> 728819 REMOVING AND INSTALLING MOTOR FOR FRONT VERTICAL ADJUSTMENT
- Install seat-adjustment motor.
- Only for USA vehicles (C02):
Install occupant detection control unit.
> 696819 REMOVING AND INSTALLING OCCUPANT DETECTION CONTROL UNIT
- Install front belt lock.
- Install padding for front seat.
- Install wire harness for power seats.
> WM, 975719 REMOVING AND INSTALLING WIRE HARNESS FOR POWER SEATS
- Install front seat frame.