Removing Front Apron
WARNING: This page is about a different variant/trim than selected.
Information
- Some of the repair illustrations show only one side of the vehicle or describe a similar component.
- Also complete certain steps on the opposite side of the vehicle as well.
- Unscrew screw -1-
on wing.
Unscrewing screw on wing
- Pull safety clips -2-
off the guide pins using > T10118 - assembly tool
.
Pulling off safety clips
- Unscrew front screws -3-
at the top.
Unscrewing front screw at the top
- Remove front apron with the help of another person.
- 4.1 Pull front apron towards the front.
Information
The number of electric plug connections can vary depending on equipment.
- 4.2 Disconnect electric plug connections and loosen wire harness -4-
from the front apron on both sides.
Disconnecting electric wire harness for front apron
- 4.3 Only for USA vehicles (C02 - USA)
Press locking lug -arrow A- and disconnect electric plug connection for side direction indicator light -arrow B- .
Releasing and disconnecting electric plug connection for direction indicator light
- 4.4 Press locking lugs and disconnect hose connections on headlight cleaning system -5-
at the right on the front apron.
Disconnecting hose connections
- 4.5 Remove front apron with the help of another person.
- 4.1 Pull front apron towards the front.