Preliminary Work
WARNING: This page is about a different variant/trim than selected.
- Disconnect ground cable of the battery.
- Loosen front trim panel until the guide clamp is accessible.
- Remove cover for front lock support.
> 703919 REMOVING AND INSTALLING COVER FOR FRONT LOCK SUPPORT
- Loosen cover for front underbody in the front apron area.
> WM, 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY
- Loosen front part of front wheel housing liner in the front apron area.
> WM, 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER