LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 45 (63 Bumper - Wagon -- 971 - PANAMERA (971)) >> WM, 631019 Removing And Installing Front Bumper >> Installing Front Bumper

Installing Front Bumper

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for screw on front bumper: > Tightening torque 50 Nm (37 ftlb.) +/- 15 % 

    Tightening torque for screw on front bumper: > Tightening torque 6 Nm (4.5 ftlb.) 

scientia non olet · About LEMON Manuals